Louis Vuitton Down Jacket
Outerwear weidian · recorded 900–1,600 g · sizes S–XXL · checked 2026-10-06
joyagoo.mobi is an independent record. Links to Kakobuy carry a source tag so the click can be counted (marked joyagoo.mobi) — it does not change what we list. How links work.
Weight band and sizing
| Recorded weight band | 900–1,600 g |
|---|---|
| Size range seen | S–XXL |
| Source platform | weidian |
| Category | Outerwear |
Band recorded by us across the samples listed in the method page; treat anything outside it as Not verified.
Three QC positions for this category
- Zip pull travel and stopper
- Down or padding distribution across panels
- Cuff and hem elastic rebound
The full reading protocol is on the QC scorecard, which scores these same five positions as pass, ask or return.
What the record says
Louis Vuitton Down Jacket sits in the Outerwear group as a listing that has to be read at the bench rather than in a photograph.
Mass first: 900–1,600 g, estimated from the Outerwear category and not measured on a bench. Then the sizing, held at S–XXL, followed by chest width flat, back length, sleeve length, and the packed height of the folded garment. Recorded alongside the measurements: the listing traces to Weidian item 7626985233 and carries this record's own reference 0865568170.
Everything else is secondary to these three points. First, zip pull travel and stopper — read at bench height rather than in the hand, because distortion hides here most easily. Second, down or padding distribution across panels, taken twice, before and after handling, because handling changes the surface. Third, cuff and hem elastic rebound, lit from a low angle so that flat spots and lifted edges separate from the surface. All three frames are filed before the parcel is closed, and any single failure sends the entry back for a repeat reading.
On the freight side, a filled jacket is the classic volumetric-weight case, because the folded parcel is mostly air. The weighing sequence is the garment alone, then again inside its own stuff sack if one is supplied, because the difference between the two figures is what actually drives the chargeable figure. One jacket of this weight class plus a folded knitwear piece is usually the practical limit before a carton is repacked. Baffle spacing is the number to write down: narrow baffles hold fill in place, wide ones let it migrate to the lower panels during transit.
Nothing here is stable between runs. Fill power, baffle spacing and shell coating weight all differ between runs, so loft and hand feel move even when the measurements do not. The three points above are kept precisely because they stay readable across that drift.