Balenciaga District Denim Jacket
Outerwear weidian · recorded 900–1,600 g · sizes S–XXL
listing data checked 2026-10-06 · write-up reviewed 2026-10-02
joyagoo.mobi is an independent record. Links to Kakobuy carry a source tag so the click can be counted (marked joyagoo.mobi) — it does not change what we list. How links work.
Weight band and sizing
| Recorded weight band | 900–1,600 g |
|---|---|
| Size range seen | S–XXL |
| Source platform | weidian |
| Category | Outerwear |
Band recorded by us across the samples listed in the method page; treat anything outside it as Not verified.
Three QC positions for this category
- Zip pull travel and stopper
- Down or padding distribution across panels
- Cuff and hem elastic rebound
The full reading protocol is on the QC scorecard, which scores these same five positions as pass, ask or return.
What the record says
Before consolidation, Balenciaga District Denim Jacket is weighed, measured and compared against the same three criteria.
Bench figures start with the unit mass: 900–1,600 g, estimated from the Outerwear category and not measured on a bench. Size coverage runs S–XXL, and the three dimensions to write down are chest width flat, back length, sleeve length, and the packed height of the folded garment. Recorded against the source listing: the listing traces to Weidian item 7627010911 and carries this record's own reference 0717547814.
Three points carry the reading. First, zip pull travel and stopper — the first place two batches visibly diverge, and it photographs clearly on a flat bench. Second, down or padding distribution across panels, read against the reference photographs rather than against the listing text. Third, cuff and hem elastic rebound, shot close enough that the finish, rather than the overall shape, fills the frame. The three readings are taken in one pass, and a miss on any of them stops the entry until it is looked at again.
On the freight side, a filled jacket is the classic volumetric-weight case, because the folded parcel is mostly air. The weighing sequence is the garment alone, then again inside its own stuff sack if one is supplied, because the difference between the two figures is what actually drives the chargeable figure. One jacket of this weight class plus a folded knitwear piece is usually the practical limit before a carton is repacked. Baffle spacing is the number to write down: narrow baffles hold fill in place, wide ones let it migrate to the lower panels during transit.
Batch variance is the part no record removes. Fill power, baffle spacing and shell coating weight all differ between runs, so loft and hand feel move even when the measurements do not. That is why the three points above were chosen: each one survives a change of production run and still tells you something on arrival.