AF1 Racing Suit
Outerwear weidian · recorded 900–1,600 g · sizes S–XXL
listing data checked 2026-10-06 · write-up reviewed 2026-10-02
joyagoo.mobi is an independent record. Links to Kakobuy carry a source tag so the click can be counted (marked joyagoo.mobi) — it does not change what we list. How links work.
Weight band and sizing
| Recorded weight band | 900–1,600 g |
|---|---|
| Size range seen | S–XXL |
| Source platform | weidian |
| Category | Outerwear |
Band recorded by us across the samples listed in the method page; treat anything outside it as Not verified.
Three QC positions for this category
- Zip pull travel and stopper
- Down or padding distribution across panels
- Cuff and hem elastic rebound
The full reading protocol is on the QC scorecard, which scores these same five positions as pass, ask or return.
What the record says
Recorded measurements for AF1 Racing Suit start with the unit itself and only afterwards with its packaging.
Expect a unit mass inside 900–1,600 g, estimated from the Outerwear category and not measured on a bench, with sizing spread across S–XXL. Measure chest width flat, back length, sleeve length, and the packed height of the folded garment. Recorded for this entry: the listing traces to Weidian item 7626546115 and carries this record's own reference 0961984751.
Everything else is secondary to these three points. First, zip pull travel and stopper — this is where an Outerwear entry most often shows its hand, and it is read from above with the piece flat. Second, down or padding distribution across panels, taken twice, before and after handling, because handling changes the surface. Third, cuff and hem elastic rebound, captured square-on and again at a raking angle, since the two frames disagree often. The three readings are taken in one pass, and a miss on any of them stops the entry until it is looked at again.
On the freight side, a filled jacket is the classic volumetric-weight case, because the folded parcel is mostly air. The weighing sequence is the garment alone, then again inside its own stuff sack if one is supplied, because the difference between the two figures is what actually drives the chargeable figure. One jacket of this weight class plus a folded knitwear piece is usually the practical limit before a carton is repacked. Baffle spacing is the number to write down: narrow baffles hold fill in place, wide ones let it migrate to the lower panels during transit.
Production drift is expected rather than exceptional. Fill power, baffle spacing and shell coating weight all differ between runs, so loft and hand feel move even when the measurements do not. Read the entry against the three points above and treat the rest as commentary.